Enterasys Networks 2E43-27 - Manual (Page 54)

9032073 E2 Event and Alarm Messages
4-3
Device Events and Alarms
CsEvFormat/Event000d01a3
{d “%w- %d %m-, %Y - %T”} - Port {I
3} on interface {I 1} of {m} ({t}), has
unsegmented. (event [{e}]).
CsPCause/Prob000d01a3
A device previously linked with this port has
been removed, powered down, or the cable
segment has a fault.
CsEvFormat/Event000d0351
{d “%w- %d %m-, %Y - %T”} - Front
panel redundant port {I 1} has been
activated by device {m} of type {t}.
(event [{e}])
CsPCause/Prob000d0351
A new port has been activated for the front
panel redundant circuit. This does NOT
indicate this port is usable, but is being tested.
CsEvFormat/Event000d0001
{d “%w- %d %m-, %Y - %T”} - {m} of
type {t} has reported a root change.
(event [{e}])
CsPCause/Prob000d0001
This bridge has become the new root of the
Spanning Tree.
CsEvFormat/Event000d0002
{d “%w- %d %m-, %Y - %T”} - Bridge
{m} of type (t) has reported a
network topology change (event
[{e}]).
CsPCause/Prob000d0002
A port has transitioned from the Learning state
to the Forwarding state, or from the Forwarding
state to the Blocking state.
CsEvFormat/Event00830000
{d “%w- %d %m-, %Y - %T”} - DLM
LostContact trap for Destination
Address {0 1}, Owner Address {0 2}
from {t} device, named {m}. (event
[{e}]). No probable cause message
CsEvFormat/Event00830001
{d “%w- %d %m-, %Y - %T”} - DLM
Threshold Trap for Destination
Address {0 1}, Owner {0 2}, OID
sequence {I 3}, OID Object {0 4} from
{t} device, named {m}. (event [{e}]). No probable cause message
CsEvFormat/Event00830002
{d “%w- %d %m-, %Y - %T”} - DLM
ReestabContact Trap for Destination
Address {0 1}, Owner Address {0 2}
from {t} device, named {m}. (event
[{e}])}.
No probable cause message
Table 4-1. Fast Ethernet SmartSwitch Module Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message