Enterasys Networks 2E43-27 - Manual (Page 47)

FddiMAC Device Configuration View
Configuration Views Fast Ethernet SmartSwitch Module
3-6 Management Module Guide
FddiMAC Device Configuration View
The FddiMAC Device Configuration view provides configuration and
operating status information.
To access this view, do the following:
1. Highlight the FddiMAC icon in the Application view (Icon mode) or the
FddiMAC text label (List mode).
2. From the View menu, select Icon Subviews -> Configuration or click
the applicable mouse button (middle or right) and select Configuration.
Station Configuration
This section of the FddiMAC Device Configuration view provides the following
configuration information on the FDDI station.
Ring State
The current state of the FDDI Ring. Table 3-2 lists the possible states and
their descriptions.
Table 3-2. FDDI Ring States
Ring
States
Description
Isolated The concentrator is not attached to the ring.
Non-Op The concentrator is attempting to enter the ring.
Ring-Op The ring is operational.
Detect The claim/beacon process of the FDDI ring protocol has exceeded
one second. This indicates a potential problem.
Non-Op-Dup The ring failed to complete the claim/beacon process because a
duplicate FDDI address has been detected.
Ring-Op-Dup The ring is operational, but a duplicate FDDI address has been
detected.
Directed The claim/beacon process did not complete within nine seconds.
The concentrator is now sending directed beacons to indicate a
problem.
Trace A problem has been detected with the station or its upstream
neighbor. A trace is being sent to notify the upstream neighbor of
the problem. The concentrator and all stations between the
concentrator and its upstream neighbor can perform self-tests.