Enterasys Networks 2E43-27 - Manual (Page 66)

9032073 E2 Application Views
5-11
FDDI FNB Application
FDDI FNB Application
This section describes the FDDI FNB application supported by this device.
The name of the model type used to model the application is FddiMAC. This
application is available when the appropriate High Speed Interface Module
(HSIM) is installed.
Table 5-4 lists the application-specific subviews available from the Icon
Subviews menu for the FDDI FNB application.
FDDI Station List View
This view displays information about the devices connected to the FDDI ring
and provides the following functionality and information.
This button updates the contents of the Station Table.
This button controls which type of address is shown in the Station List. It
toggles between MAC (Physical) and Canonical (Ethernet) and displays the
format not currently selected.
Set Filter Opens the Filter Dialog box for the selected column of the Station
table. Type a character string to search the column.
Clear Filter returns the Station table to its normal state.
Table 5-4. FDDI FNB Application Subviews menu
Menu Selection Description
DevTop Opens the Device Topology view described in the Operator’s
Reference.
Station List Opens the FDDI Station List view described below.
Acknowledge Allows you to acknowledge an alarm condition.
Configuration Opens the Device Configuration view described in Chapter 3,
Configuration Views.
Model Information Opens the Model Information view described in the
Operator’s Reference.
Update
MAC/Canonical
Set Filter/Clear Filter