Enterasys Networks 2E43-27 - Manual (Page 62)

9032073 E2 Application Views
5-7
Fast Ethernet Application
Fast Ethernet Application
The name of the model type used to model the application is FastEnetApp.
The application provides the Fast Ethernet Port Table and Fast Ethernet
Configuration view, which allow you to configure ports for Ethernet or Fast
Ethernet transmission or use Auto-Negotiation to determine transmission
mode.
Fast Ethernet Port Table
Access this table as follows:
1. Highlight the FastEnetApp icon (Icon mode) or text label (List mode).
2. From the View menu, select Icon Subviews -> Control Table.
The Fast Ethernet Port Table provides the following information:
Interface
The interface number to which this Fast Ethernet information applies.
Port Group
The port group number to which this Fast Ethernet information applies.
Port
The physical port number to which this Fast Ethernet information applies.
Operational Mode
The current operational mode of this port.
Fast Ethernet Configuration View
This view (Figure 5-4) allows you to configure ports for Ethernet or Fast
Ethernet transmission or to use Auto-Negotiation in determining
transmission mode. Open this view by double-clicking any entry in the Fast
Ethernet Port Table. The Fast Ethernet Configuration view carries the
Interface, Port Group, and Port information over from the Port Table.