Enterasys Networks C1H124-24 - Manual (Page 5)

SAFETY COMPLIANCE
Warning: Fiber-optic Port Safety
When using a fiber-optic media expansion module, never look at the transmit laser while it is
powered on. Also, never look directly at the fiber TX port and fiber cable ends when they are
powered on.
Avertissment: Ports pour fibres optiques - sécurité sur le plan optique
Ne regardez jamais le laser tant qu’il est sous tension. Ne regardez jamais directement le port TX
(Transmission) à fibres optiques et les embouts de câbles à fibres optiques tant qu'ils sont sous
tension.
Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit
Niemals ein Übertragungslaser betrachten, während dieses eingeschaltet ist. Niemals direkt auf den
Faser-TX-Anschluß und auf die Faserkabelenden schauen, während diese eingeschaltet sind.
Underwriters Laboratories Inc. (USA)
Important! Before making connections, make sure you have the correct Cord Set. Check it (read the label on the cable)
against the following specification list.
Operating Voltage Cord Set Specifications
120 Volts UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug rated 15A, 125V
240 Volts (Europe only) Cord Set with H05VV-F cord having three conductors with minimum diameter of
0.75 mm
2
IEC-320 receptacle
Male plug rated 10A, 250V