Lanview leds, Table 4-1, Describes the – Enterasys Networks C1H124-24 User Manual
Page 54
Using LANVIEW
4-2
Troubleshooting
NOTE: The terms flashing, blinking, and solid used in
indicate the
following:
Flashing: LED is flashing randomly.
Blinking: LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid: LED is on steady and not pulsing.
Table 4-1
LANVIEW LEDs
LED
Color
State
Recommended Action
CPU
Red
Solid. System is not fully
functional, or the system
is experiencing a fatal
error.
If the LED remains red for several minutes,
the system may have a fatal error. Contact
Enterasys Networks for technical support.
Amber
Solid. Power-up testing
in progress.
If the LED remains amber for more than
several minutes, contact Enterasys Networks
for technical support.
Green
Solid. System is fully
functional.
None.
Blinking. System is
booting up.
None.
Amber
Blinking. Image is being
loaded into Flash
memory.
None.