Everpure 327 - Manual (Page 12)

Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 6 3280020
HYDROLIFE FILTER INSTALLATION
a. Place the filter inside the canister. Be sure the o-ring is seated in the
canister just below the threads.
b. Screw the canister and filter assembly onto the filter head until it comes
to a stop.
c. Open the water valve on the inlet line by rotating the handle to the verti-
cal position as shown.
HYDROLIFE FILTER REMOVAL
a. Close the valve on the inlet line by rotating the handle into the horizontal
position as shown.
b. Relieve water pressure by performing two or three water throws (See
"Test Throw Still Water" on page 64).
c. Unscrew the filter and canister assembly from the filter head. Remove
the filter from the canister.