Everpure 327 - Manual (Page 52)

Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 46 3280020
TIME INTERVAL EDITING
You can select up to four times of day for each special vending period.
NOTE
If two or more of these time periods overlap, the interval with the highest
priority will overrule the other(s). This order of precedence is:
• INHIBIT
• FREEVEND
• DISCOUNT
For example, if a DISCOUNT time period is scheduled for a certain area
before the end of an INHIBIT time period, DISCOUNT does not begin
until the INHIBIT interval has ended for that area.
The time interval editing procedure is almost the same for the INHIBIT, FREEV-
END, and DISCOUNT intervals. There is one difference for the DISCOUNT time
interval, so we will use it in our example. Assume you just finished the SET TIME-
OF-DAY DISCOUNT VENDING procedure. Step 1 picks up where you left off . . .
1. The display shows DISCT - - - - . Press the number of the time interval you
want to edit, or to edit time interval 1 (we'll use interval 1 for this
example).
2. The display shows 1.DISCT ON or 1.DISCT OFF This display tells you whether
your time interval (represented by 1) is on or off. Press to change
the condition of the time interval.
NOTE
If you turn an interval ON, it must be edited. You can edit a time
interval now, then turn it OFF until another time.
3. Press . The display shows 1.DSCT X . "X" represents the discount
percentage for this period. Enter a discount percentage of 25 with the
number keys. (Discount percentages of from 0 to 99 are permitted.) The
machine will apply a 25% discount to each price, rounding up to the nearest
nickel (or whatever the smallest coin accepted by the coin mechanism is).
4. Press . The display shows 1.STRT X.XX
K==
X.XX is the currently set start
time. Enter a new start time (24-hour format) for this interval. To enter the
time for 3:30 pm, enter 1530.