Initial setup of nonstandard bill validator – Everpure 327 User Manual
Page 35
Cold Drink Center (327/328) Operator’s Guide
3280020
Page 29
August, 2003
INITIAL SETUP OF NONSTANDARD BILL VALIDATOR
1.
Connect the bill validator, and follow the steps in "Select Bill Validator and
Options" on page 28, to select
MDB.1.2.5.10.20
in the bill validator selection
screens.
MDB.=
<*> will not be an option yet. Exit the bill validator setup by
pressing
. Bill information is now collected from the validator.
2.
Press
, then press
until
MDB.=
<*> displays.
3.
Press
.
1. 1.00 ON
will display. The first number (
1.
) indicates bill
validator channel 1, the
1.00
is the bill denomination, and
ON
indicates that
the validator will accept $1.00 bills.
4.
Press
to toggle the bill acceptance
ON
or
OFF
.
5.
Press
and
to scroll through the list of other denominations
and
to set them to
ON
or
OFF
.
6.
Press
to move up to the top level screen.
NOTE
If a denomination does not display in the scroll list of available
denominations, check the binary switch settings for the
validator. If the binary switch for a given denomination is set to
“off”, it will not display in the list of denominations.
7.
CONTINUE.