Everpure 327 - Manual (Page 54)

Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 48 3280020
SELECT A STANDBY MESSAGE
1. Press , then press until the display shows STANDBY XX .
"XX" represents the current message number selected for the standby
message. Two dashes mean that the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To
do this, press and follow the procedure given in "Edit Custom Message"
on page 49.
4. CONTINUE.
SELECT AN OUT-OF-SERVICE MESSAGE
1. Press , then press until the display shows
SERVICE XX
.
"XX" represents the current message number selected to display when the
machine is out-of-service. Two dashes mean that the factory-set message
is selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To
do this, press and follow the procedure given in "Edit Custom Message"
on page 49.
4. CONTINUE.
STANDBY
MESSAGE
The message that displays during normal vending
periods when there are no out-of-service faults on
the machine.