Edirol R-09HR - Manual (Page 104)

104
R-09HR configuration settings
Sets whether the R-09HR will receive the infrared data when the remote control is used.
fig.inputsetting-e.eps_80
1.
Select “Remote Control” from the <Menu
Screen>.
Use the [PLAY Button ] and [STOP Button ] to select
“Remote Control,” then press the [REC] Button.
fig.inputsetting-e.eps_80
2.
Set remote control reception to on or off.
Use the [PREV button ] and [NEXT button ] to change
the File Name value.
When finished with the settings, press the [MENU button] to return
to the previous screens, in order.
Setting whether to accept remote control operations
(Remote Control)
Setting
Disable
Enable
Move the
cursor
up or down
Enter
Move the
cursor
up or down
R-09HR_e.book 104 ページ ２００７年１２月１７日 月曜日 午後２時１６分