Edirol R-09HR - Manual (Page 54)

54
Playing back
Connect headphones or speakers to listen to playback.
fig.basic-e.eps_80
• No sound is played from the R-09HR’s preview monitor when headphones or speakers are connected
to the [Headphone Jack].
• You may still hear some sound when the power is switched on, but this is normal, and does not
indicate a malfunction.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
Connecting headphones and speakers
Headphones
Analog
speakers
When connecting speakers
Turn on power to your various devices in the order specified. By turning on devices in
the wrong order, you risk causing malfunction and/or damage to speakers and other
devices.
1. Turn off power to the R-09HR.
2. Turn the volume of the speakers all the way down and then turn off the
power.
3. Connect the speakers.
Only speakers with internal amplifiers can be connected.
Use an audio cable to connect the line out jack on the speaker to the [Headphone
Jack] on the R-09HR.
4. Turn on power to the R-09HR.
5. Turn on power to the speakers, and gradually increase the volume to the
desired level.
R-09HR_e.book 54 ページ ２００７年１２月１７日 月曜日 午後２時１６分