Edirol R-09HR - Manual (Page 105)

105
R-09HR configuration settings
Set the internal clock.
The time and date set here is used as data for the recorded songs.
“Displaying song or folder information (Information)” (p. 74)
When the power is on, the internal clock draws power from the AC adaptor or the batteries. When the
power is off, the internal clock will run temporarily on the power stored in the unit, but if the power is off
for several days, the internal clock settings return to the original settings (initial status). When power is
turned on in initial status, the message “Clock Initialized” is shown.If “Clock Initialized” is shown, please
reset the date and time.
fig.datatime.eps_80
1.
Select “Date & Time” from the <Menu
Screen>.
Use the [PLAY Button ] and [STOP Button ] to select
“Date & Time,” then press the [REC Button].
e-e.eps_80
2.
Edit the time and date.
fig.edit-datatim
1. Move the cursor.
Use the [PREV button ] and [NEXT button ] to move
the cursor to the right or left.
fig.edit-datetime-2-e.eps_80
2. Edit the date and time.
Move the cursor to the character to change, use the [PLAY
Button
] and [STOP Button ] to change the date and
time, then press the [REC Button] to enter the changes.
• To cancel, press the [MENU Button] before pressing the [REC
Button].
• When finished with the settings, press the [MENU button] to
return to previous screens.
Do not turn off power while editing.
Setting the date and time (Date & Time)
Move the
cursor
up or down
Enter
Move cursor
to the left
or right
Change
the value Enter
R-09HR_e.book 105 ページ ２００７年１２月１７日 月曜日 午後２時１６分