Edirol R-09HR - Manual (Page 96)

96
R-09HR configuration settings
To reduce power consumption, this feature automatically turns off the display when no
operations are performed within a set period of time.
fig.displaysetting-e.eps_80
1.
Select “Display Setup” from the <Menu Screen>.
Use the [PLAY Button ] and [STOP Button ] to select
“Display Setup,” then press the [REC Button].
fig.displaytimer-e.eps_80
2.
Select “Display Timer.”
Use the [PLAY Button ] and [STOP Button ] to move
the cursor to the Display Timer line.
fig.setdisplaytimer-e.eps_80
3.
Set the time.
Use the [PREV button ] and [NEXT button ] to change
the Display Time value, and set the time until the screen
goes dark.
Set to “OFF” to keep the screen bright no matter how much
time passes.
(units: seconds)
“Power saving feature” (p. 22)
When finished with the settings, press the [MENU button] to return
to previous screens, in order.
Setting the time until the screen is darkened when
no operations are performed for a set period of time
(Display Timer)
Setting
OFF
2
5
10
20
Move the
cursor
up or down
Enter
Move the
cursor
up or down
Change
the value
R-09HR_e.book 96 ページ ２００７年１２月１７日 月曜日 午後２時１６分