Edirol R-09HR User Manual
Page 22
22
Using the R-09HR
fig.power-onoff-e.eps_80
5.
Turn power on.
Press and hold down the [POWER switch] to turn on the
power.
6.
Set the battery type.
Select the battery type (alkaline batteries or nickel metal
hydride batteries) on the <Menu Screen>.
“Setting the battery type (Battery)” (p. 99)
Hold down
Cautions when using batteries with the R-09HR
•
Do not mix new and used batteries or different types of batteries.
•
When not using the R-09HR for an extended time, it is recommend that the batteries be
removed to prevent leakage.
•
When connecting to a PC via a USB cable, always use the AC adaptor to prevent
power failures during connection.
Power saving feature
The R-09HR is equipped with a power saving feature designed to prevent the
unnecessary consumption of power. If no operation is performed for a set amount of
time, the display will be darkened or the power will be shut off according to the settings
for the power saving feature.
Setting the power saving feature
• “Setting the time until the screen is darkened when no operations are performed for a set period of
• “Turning off indicators when the display goes dark (Rec/Peak LED)” (p. 97)
• “Setting the time until the power turns off when no operations are performed for a set amount of
time (Auto Power Off)” (p. 98)
Remaining battery power indication
When the battery power becomes low, a low battery icon
is shown in the lower
right of the display. Please replace the batteries as soon as possible.
If batteries with low power are used, the “Battery Low” message is displayed and all R-
09HR functions will eventually stop.
Battery life
When using alkaline batteries
* The battery life indicated above is approximate. Battery life will vary depending on the
environment in which you are using the R-09HR and your method of use.
Continuous playback
approximately 5.5 hours (When using headphones)
Continuous recording
approximately 4.5 hours (When using internal microphone)
R-09HR_e.book 22 ページ ２００７年１２月１７日 月曜日 午後２時１６分