Edirol R-09HR - Manual (Page 84)

84
R-09HR configuration settings
fig.open-set.eps_80
Press the [MENU Button].
The <Menu screen> is shown.
The screen cannot be changed while playing or recording a song. Please
try while the unit is stopped.
Decide on whether the sound quality or a longer recording time is to be given precedence,
and set the sampling frequency accordingly.
“Configuring recording” (p. 34)
fig.recoedersetting-e.eps_80
1.
Select “Recorder Setup” from the <Menu
Screen>.
Use the [PLAY Button ] and [STOP Button ] to select
“Recorder Setup,” then press the [REC Button].
fig.setsamplingrate-e.eps_80
2.
Set the sampling frequency (Sample Rate).
Use the [PREV button ] and [NEXT button ] to change
the Sample Rate value.
When finished with the settings, press the [MENU button] to return
to previous screens, in order.
SD Card
Information
Shows information about the SD memory card.
— p. 106
Format
Formats the SD memory card.
— p. 27
Factory
Reset
Initializes the R-09HR. — p. 107
Displaying the <Menu screen>
Setting the sampling frequency when recording
(Sample Rate)
Setting
44.1 kHz
48.0 kHz
88.2 (kHz)
96.0 (kHz)
Category Menu/Effect
Value
(Default value in bold)
Procedure
Show
<Menu Screen>
Move the
cursor
up or down
Enter
Changes
the value
R-09HR_e.book 84 ページ ２００７年１２月１７日 月曜日 午後２時１６分