Silvercrest EIM-804 GR User Manual
Page 16
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
Product description:
Digital Weekly Timer
Art. No.:
97318-3
Model No.: EIM-804 GR
GB
Disposal
The packaging is wholly composed of environ-
mentally friendly materials that can be disposed
of at a local recycling centre.
Contact your local refuse disposal authority for more details
of how to dispose of your discarded product.
In the interest of the environment, do not throw
out your discarded device with your household
refuse. Take it to a suitable centre where it can
be disposed of properly. Your local council will
be able to tell you where the collection centres
are located and their opening times.
Press the ON / AUTO / OFF button (MANUAL)
3
again to continue the countdown.
Press the display mode button (TIME)
7
to change
from the countdown display to the current time.
Press the display mode button (TIME)
7
to change
from the current time to the countdown display.
Press the hour button (HOUR)
9
and the minute button
(MIN)
2
at the same time to cancel the countdown
function.
Cleaning and care
Never use liquids or cleaning agents, as they may
damage the device.
Clean the outside of the device only with a soft, dry
cloth.
Setting the countdown
Press the input button (SET)
8
to access the timer menu.
Press and keep pressed the input button (SET)
8
until
the “CTD” icon appears in the LC display
1
.
Press the hour button (HOUR)
9
repeatedly until the
desired hour value appears in the LC display
1
.
Press the minute button (MIN)
2
repeatedly until the
desired minute value appears in the LC display
1
.
Note: The countdown can be set from 1 minute to
11 hours, 59 minutes.
Press the display mode (TIME) button
7
.
The device returns to its normal operating mode.
Press the hour button (HOUR)
9
and the minute button
(MIN)
2
at the same time to start the countdown function.
Manually ending the countdown
Press the ON / AUTO / OFF button (MANUAL)
3
to
halt the countdown while it is running.
AUTO ON: Switching times are active, the time switch
is switched on.
Setting the random mode
Note: This function switches the time switch arbitrarily on
and off and is intended to prevent burglaries by
simulating
an occupied house with e.g. lights switching on and off at
irregular intervals. Your preprogrammed switching commands
are moved by a random amount up to 30 minutes on each
day. This function is only possible if one or more switching
commands have been set.
Press the hour button (HOUR)
9
for at least 3 seconds.
The time switch changes into random mode. The random
mode symbol “RND” appears in the LC display
1
to
show that the random mode is switched on.
Press the hour button (HOUR)
9
again for 3 seconds
to cancel the random mode.
erased from the memory, merely deactivated. The symbol
“- - : - -” appears in the display.
Then press the recall button (RECALL)
5
again to
reactivate the cancelled switching time.
Manually skipping switching times
At any time, and independently of programmed times,
you can skip manually to the next switching time.
To do this, press the ON / AUTO / OFF button
(MANUAL)
3
repeatedly until the desired command
appears in the LC display
1
:
OFF: All switching times are cancelled, the time switch
allows no current to pass to the connected devices.
AUTO OFF: Switching times are active, the time switch
is switched off.
ON: All switching times are cancelled, the time switch
allows current to pass continuously to the connected
devices.
Note: You can program up to 20 different switching
sequences. To do this, repeat the above-described program-
ming procedure in each case. The PROG 2 ON “- - : - -”
indicator etc. appears in the LC display
1
when each
further setting is stored.
Changing or checking
switching times
To change or check the switching times, press the input
button (SET)
8
and the programmed switching times
appear one after the other in the display.
To change the days, hours or minutes, proceed as
described in the section “Programming the time switch”.
Activating / deactivating
switching times
Press the input button (SET)
8
.
Then press the recall button (RECALL)
5
to cancel the
programmed switching time. The switching data are not
Press the minute button (MIN)
2
repeatedly until the
desired minute value appears in the LC display
1
.
Press the input button (SET)
8
again to store the setting.
The PROG 1 OFF “- - : - -” indicator appears in the LC
display
1
.
Switch-off time:
Press the day of the week button (WEEK)
6
repeatedly
until the desired day of the week or block of days of the
week appears in the LC display
1
.
Press the hour button (HOUR)
9
repeatedly until the
desired hour value appears in the LC display
1
.
Press the minute button (MIN)
2
repeatedly until the
desired minute value appears in the LC display
1
.
Press the input button (SET)
8
again to store the setting.
Press the display mode button (TIME)
7
to return to the
current time.
• MO WE FR
Monday + Wednesday + Friday
• TU TH SA
Tuesday + Thursday + Saturday
• MO TU WE
Monday – Wednesday
• TH FR SA
Thursday – Saturday
• MO TU WE TH FR SA SO
Monday – Sunday
Note: As soon as a particular day or combination of days
has been stored, the device executes the programmed
switching sequence at the same time on each of these days
of the week.
Press the hour button (HOUR)
9
repeatedly until the
desired hour value appears in the LC display
1
.
Activating summer / winter time
Press the display mode button (TIME)
7
until the
additional “+1h” appears in or disappears from the
time indicator.
Programming the time switch
Switching-on time:
Press the input button (SET)
8
once. The PROG 1 ON
“- - : - -” indicator appears in the LC display
1
.
Press the day of the week button (WEEK)
6
repeatedly
until the desired day of the week or block of days of the
week appears in the LC display
1
. The following days
of the week or blocks of days of the week are possible:
• MO TU WE TH FR
Monday – Friday
• SA SU
Saturday + Sunday
• MO TU WE TH FR SA
Monday – Saturday
accelerate the setting process and reach the desired
value more quickly. This quicker method can also be
used for making the following settings.
Note: MO = Monday, TU = Tuesday, WE = Wednesday,
TH = Thursday, FR = Friday, SA = Saturday, SU = Sunday
Press the hour button (HOUR)
9
repeatedly until the
desired hour value appears in the LC display
1
.
Press the minute button (MIN)
2
repeatedly until the
desired minute value appears in the LC display
1
.
Release the display mode (TIME) button
7
.
Note: If approx. 10 seconds pass without any settings
being made, then the device returns to the normal time
display.
Note: The time switch is now in operation. This is indi-
cated by the flashing of the colon in the LC display
1
.
Plug the device into a properly installed 220–250 V, 50 Hz
mains outlet socket. All the indicators in the LC display
1
appear briefly. Then the time indicator appears.
Note: In the event of a power cut, the in-built recharge-
able battery ensures that the time is kept going and the
automatic switching program remains activated. The
device is fully programmable without a power supply,
as long as the rechargeable battery is fully charged.
Operation
Setting the day of the week and time
Keep the display mode button (TIME)
7
pressed during
the following programming procedures.
Press the day of the week button (WEEK)
6
repeatedly
until the desired day of the week appears in the LC
display
1
.
Tip: By pressing and keeping pressed the day of the
week button (WEEK)
6
for approx. 3 seconds you can
other suitable expert if you are in any doubt about the
inductive load of your device.
Do not open the device. Never attempt to replace or
repair parts yourself.
Before cleaning the device, always disconnect it from
the mains outlet socket and pull all mains plugs out of
the device.
Please ensure that the device is always easily accessed.
In the event of malfunctions, pull the device out of the
mains outlet socket.
Before use
The time switch has an integral rechargeable battery. This
serves to retain stored data, e.g. time, date and switching
procedures. The rechargeable battery must be charged for
24 hours before first use. You can make settings on the
device during the charging process.
Always check the device for damage before plugging it
into a mains outlet socket. Do not use the device if you
discover it is damaged in any way. In the event of dam-
age, repairs or other problems with the device, please
contact a specialist repair shop.
Do not plug in any devices that hang from and exert
their self-weight on the plug. This will prevent any non-
permitted heating up of and mechanical damage to the
mains outlet socket.
Do not use the device with power outlet strips or extension
cables.
Please note that damage arising from improper handling,
non-observance of the operating instructions or interfer-
ence with the inside of the device by unauthorised persons
is excluded from the warranty.
The device is not suitable for switching inductive loads in
excess of 10 A (amperes). For this reason never operate
electric motors or fluorescent lights fitted with conven-
tional ballasts with this time switch. Ask an electrician or
Use the device only with a properly installed mains
outlet socket.
CAUTION! Do not have one digital time switch in-
serted behind another. There is the danger of mechanical
damage if one adapter plug is inserted behind another.
RISK TO LIFE FROM
ELECTRIC SHOCK! Keep the device away
from moisture and do not touch it with moist
hands.
Do not allow the device to be subjected to extreme heat
or cold.
Do not allow the device to be subjected to extreme
temperature fluctuations. Failure to observe this advice
could lead to condensation forming. Wait until the device
has reached the temperature of the room before you
use it.
Do not cover the device with newspapers, articles of
clothing or the like. Otherwise the device may heat up,
which is not permitted.
General safety advice
DANGER OF LOSS
OF LIFE OR ACCIDENT TO INFANTS
AND CHILDREN! The product is not a toy.
Never leave children unsupervised with the packaging
material or the device. The packaging material presents
a suffocation hazard and there is a risk of loss of life
from electric shock.
This device is not intended to be used by persons (in-
cluding children) with restricted physical, sensory or
mental abilities or with insufficient experience and / or
knowledge, unless they are supervised by a person who
is responsible for their safety or they have received in-
struction on how to use the device from such a responsible
person. Children should be supervised in order to ensure
that they do not play with the device.
© by ORFGEN Marketing
IAN 66142
Inter-Union Technohandel GmbH
Klaus-von-Klitzing-Str. 2
D-76829 Landau / Pfalz
66142_Zeitschaltuhr_digital_innen_FI_SE_GB.indd 3
20.07.11 18:16