Silvercrest SFB 10.1 C3 - Manual (Page 10)

SilverCrest SFB 10.1 C3
8 - English
Important note on compatibility
All functions described in these operating instructions are
valid only if the keypad layout of your original remote
control matches exactly the one of your 10-in-1 remote
control. But this only very rarely the case. This means that if
you are unable to use all functions of your original remote
control, it does not mean there is a fault with your 10-in-1
remote control.
Trademark and brand information
All brand and/or product names mentioned in these operating
instructions and in the device code list are property of their respective
owners and are used for product description and identification purposes
only.
Getting started
After inserting the batteries, the display lights up and the start window
appears after about 1 second. The start window shows the device, code,
day of the week and time. The default setting is TV, Monday and
12.00AM. From the start window you can toggle to the device that you
want to control by using the device buttons (4). The device code for the
selected device is displayed at the same time.
Briefly press the button to display the selected device, the day of
the week and the full date. If no button is pressed for a while, the remote
control light will go off. You can set the light delay time in the
“CONFIGURE” menu.
Remote control buttons
Device buttons
Symbol Device type
Audio amplifier
Television
Blu-ray player
Video recorder
Digital satellite receiver
DVD player
Cable TV receiver
Auxiliary device 1
CD player
Auxiliary device 2
Numeric keypad / number buttons
Symbol Function
You can use these buttons to enter channel
numbers, to enter device codes manually
and to enter numbers.