Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - Manual (Page 17)

To control the camera, use the “+” to increase, “-“ to decrease it, or “STD” to return
to default value.
6-5.Operation Mode
Continuous Mode:
The i-WATCHER will always try to capture the
image as fast as possible. This is the default
setting.
Periodic Mode:
MS (mill-second) or s (second) can be set. The value set must be greater than 0.
Setting the periodic mode to 5 seconds will update the image every 5 seconds. The time
interval can be checked by the time displayed on the image.
7. View Log File
The user can check the log information of the i-WATCHER, including the Main Info,
Appended Info, Operator IP, Operator MAC, and Time.
Select the ”Camera Window” button to return to Camera mode.
17