Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - Manual (Page 36)

18. i-WATCHER Installation Method
i-WATCHER Installation Method 1:
Internet Access Mode: Leased Line, ADSL or Cable Modem
Real IP Address: A few Static IP addresses required
IP Sharing or LAN Hub: A Normal LAN switch or hub
i-WATCHER Network Setup: LAN Enable / Manually
User:
User that have installed multiple i-WATCHER with
multiple Static IP addresses
z Connect the given BLUE cable to your i-WATCHER and PC, and use the IPEDIT in the
CD-ROM to set up the i-WATCHER
z Please refer to Page 3 for IP address setting.
z
Assign individual i-WATCHER with a Static IP address.
z
For remote viewing of IP-Cam: launch IE browser and enter the Static IP address of the
respective i-WATCHER. e.g. http://230.80.86.02
36