I-watcher installation method 8 – Edimax Technology i-Watcher Pan/Tilt Internet IP Camera User Manual
Page 43
i-WATCHER Installation Method 8:
Internet Access Mode:
Leased Line ADSL or Cable Modem
Real IP Address:
1 Static IP address required
IP Sharing or LAN Hub:
Enable DHCP and NAT function
i-WATCHER Network Setup:
LAN Enable (Manually)
Web Server Port Number (Setting required)
User:
1 Static IP address and multiple i-WATCHER s
installed to the multiple IP sharing switch
z
Public IP of the IP sharing switch have to set to a Static IP address (e.g.:
230.80.86.01), allocate another Private IP address, enable the DHCP function of the
IP sharing Hub
z
In each i-WATCHER IP address settings, assign with different virtual IP, as well as
different port numbers for the Http Port setting.
z
For the setting of the Port switching of the IP sharing switch, please refer to the
i-WATCHER’s IP address and the Port sequence synchronization setting.
z
For remote viewing of i-WATCHER: launch IE browser and enter the IP address of the
IP Sharing switch and the Port Number of the IP-Cam, e.g.:
43