Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - Manual (Page 20)

8-2. User Setup
8-2-1. User Management
User authorization required:
Checking the Enable use check function will
enable the user check when the users want to
Access the i-WATCHER. The Login window will
prompt for the User name and Password.
If the check box is not checked, then the user check will not be enabled. All users can
access the i-WATCHER directly, with the administrator’s permission. A Login window is not
required.
Note: Before you select Enable user check ”Yes” button, please remember to change
the administrator password.
Add a user or change password:
Enter a new user name and password information
to create a new user account, or enter an existing
user account, then set a new password to replace
the old password.
Confirm by clicking on the [Set/Change] button to
create the account or change password.
After submitting, the “Current User List:” would
display the newly created user account. In this example: “newuser”.
8-2-2. Delete User
Select the user account from the “Username” list box.
Click the [Delete] button to delete the selected user account. A confirmation window will
prompt the user to select “OK” or “Cancel”.
After selecting the “OK” button, the selected user account will be deleted from the “Current
User List”. In this example, the “newuser” account will be removed.
8-3. Motion Detect Setup
8-3-1. Motion Detect Enable / Disable
Check the “Enable motion detection” check box
to activate the motion detection.
If the check box is not checked, the motion
detection send mail function will not be enabled.
Enter the “ Sensitivity “ button for select “High” or “Middle “ and “Low “ mode .
20