Edimax Technology i-Watcher Pan/Tilt Internet IP Camera User Manual

Page 24

Advertising
background image

8-4-7. FTP uploads when motion detected (Alert IN Enabled)


The motion-detected images can also be uploaded to FTP server. The procedures are as
follow:

X Enter the IP address or domain name of the “FTP Server”.

Y Enter the “Username” and “Password” of the FTP server.

Z Certain FTP servers need an “Account” field. Leave it blank if it is not needed.

[ Enter the “Remote folder” upload path information for saving the images.

\ Confirm by selecting the [Save Settings] option to save the settings.



8-5.Network Setup

8-4-1. Manual Setup (LAN) for fixed IP address users:


On the network environment, the administrator can assign a unique IP address to each
i-WATCHER. The procedures are as follow:

X Check the “Manually” radio button.
Y Enter the “IP Address”, “Network Mask (Subnet mask)”, “Default gateway”, and the
“DNS1”,“DNS2”, as well as ‘DNS3” in formations.
Z Select “Reboot immediately” to reboot to allow these settings to take effect.

„ DHCP

The “DHCP” is automatically set as the default network setting of i-WATCHER. When an
i-WATCHER is joined into the LAN, it will issue the DHCP packets to request an IP address
that is dynamically assigned by the DHCP server. If it is unable to get a DHCP address on a
limited tries, the i-WATCHER will assign a default IP address such as “169.254.xx.xx”.

8-4-2. Connect to ADSL by PPPoE Mode


The i-WATCHER can directly connect to the ADSL. However, it should be setup on the LAN
environment to setup the PPPoE information before connecting to the ADSL modem.
Power on the i-WATCHER and it will dial in to the ISP connection to the WAN via the ADSL
modem.

The procedures are as follow:

X

Connect to the LAN by DHCP or Fixed IP

Y

Access the i-WATCHER and enter [Configuration]

Î [Network Setup]

Z

PPPoE Configuration

[

select the “Dial on power Up” check box.

\

If the ADSL Modem and i-WATCHER are connected on a hub and after the PPPoE

Information’s are entered, you can then select the “ Save and Dial Now” option to do the

PPPoE dial.

24

Advertising