Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 11)

❏ Advanced Settings
You can configure the advanced settings for the printer. This page is mainly for an administrator.
Related Information
& “Web Config and EpsonNet Config Feature Comparison” on page 14
Accessing Web Config
Enter the printer's IP address into a web browser. JavaScript must be enabled. When accessing Web Config via
HTTPS, a warning message will appear in the browser since a self-signed certificate, stored in the printer, is used.
❏ Accessing via HTTP
IPv4: http://<printer IP address> (without the < >)
IPv6: http://[printer IP address]/ (with the [ ])
❏ Accessing via HTTPS
IPv4: https://<printer IP address> (without the < >)
IPv6: https://[printer IP address]/ (with the [ ])
Administrator's Guide
Using Network Configuration Software
11