Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 26)

Related Information
& “Accessing Web Config” on page 11
& “Obtaining and Importing a CA-signed Certificate” on page 31
Using SNMPv3 Protocol
Configuring SNMPv3
If the printer supports the SNMPv3 protocol, you can monitor and control accesses to the printer.
1. Access the printer's Web Config and select Wi-Fi/Network Settings > Services > Protocol .
2. Enter a value for each item of SNMPv3 Settings.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
& “Accessing Web Config” on page 11
& “SNMPv3 Setting Items” on page 26
SNMPv3 Setting Items
Administrator's Guide
Using the Printer in a Secure Network
26