Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 24)

Service Name Protocol type Local port
number
Remote port
number
Features controlled
FTP Control
(Remote) TCP Any port 21 FTP client (controlling to forward scan
data and received fax data)
CIFS (Local)* TCP 445 Any port CIFS server (Sharing a network folder)
CIFS (Remote)* TCP Any port 445 CIFS server (forwarding scan data and
received fax data to a folder)
HTTP (Local) TCP 80 Any port HTTP(S) server (forwarding data of
Web Config and WSD)
HTTPS (Local) TCP 443 Any port
HTTP (Remote) TCP Any port 80 HTTP(S) client (communicating
between Epson Connect or Google
Cloud Print, firmware updating and
root certificate updating)
HTTPS (Remote) TCP Any port 443
*If you want to control features forwarding scan data and received fax data, sharing a network folder or receiving fax from PC-
FAX, change the setting of Method of Choosing Port to Port Number from Service Name, and then specify the port
numbers for CIFS and NetBIOS.
Configuration Examples of IPsec/IP Filtering
Receiving IPsec packets only
This example is to configure a default policy only.
Default Policy :
❏ IPsec/IP Filtering: Enable
❏ Access Control: IPsec
❏ Authentication Method: Pre-Shared Key
❏ Pre-Shared Key: Enter up to 127 characters.
Group Policy :
Do not configure.
Receiving printing data and printer settings
This example allows communications of printing data and printer configuration from specified services.
Default Policy :
❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access
Group Policy :
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of a client
❏ Method of Choosing Port: Service Name
❏ Service Name: Check the box of ENPC, SNMP, HTTP (Local), HTTPS (Local) and RAW (Port9100).
Administrator's Guide
Using the Printer in a Secure Network
24