Epson WP-M4595DNF - Manual (Page 104)

E
Hang up the phone.
Receiving Faxes
Receiving faxes automatically
The product automatically receives and prints faxes in Auto Answer mode.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as a data or printed.
& “Changing Fax Output setting to print” on page 99
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
A
Load A4-size plain paper.
&
“Loading Paper” on page 24
B
Press Auto Answer to turn on the Auto Answer mode.
Note:
❏ When an answering machine is connected directly to this product, make sure you set Rings to Answer correctly
using the following procedure.
❏ Depending on the region, Rings to Answer may be unavailable.
C
Enter F Setup mode.
D
Select Fax Settings.
E
Select Communication.
F
Select Rings to Answer.
G
Press u or d to select the number of rings, and then press OK.
! Caution:
Select more rings than needed for the answering machine to pick up. If it is set to pick up on the fourth ring, set the
product to pick up on the fifth ring or later. Otherwise the answering machine cannot receive voice calls.
User’s Guide
Faxing
104