Epson WorkForce DS-7500N - Manual (Page 14)

Connecting to an IPv6 Network
A
Turn on your scanner.
B
When the home screen ("Scanner is ready") is displayed, press the F setting button.
C
Select Network with the u up and d down buttons, and then press the Z button.
D
Select IPv6 - On with the u up and d down buttons, and then press the Z button.
E
Press the F setting button to return to the home screen.
F
After "Configuring network setting" is displayed, restart the panel.
Note:
Use the Web-based EpsonNet Config to make manual settings for IPv6.
Set the password for protecting network security using Web-based EpsonNet Config.
U
“Using EpsonNet Config” on page 14
Using EpsonNet Config
Web-based EpsonNet Config is software that is stored on the Network Interface Panel.
Network Interface Panel User's Guide
Setting Up the Network Interface Panel
14