Epson WorkForce DS-7500N - Manual (Page 20)

About the Control Panel
Menu List
Environment menu
Item Description
Network You can check network settings such as the MAC address and IP address.
Maintenance You can check the number of scanned sheets. If the scanner being used has an Automatic
Document Feeder installed, you can check or reset the number of scanned sheets for the Roller
Assembly Kit, Pickup Roller, Separation Pad, and Separation Roller.
Display menu
Item Description
Language Specifies the language displayed on the LCD panel.
Brightness Adjusts the brightness of the LCD panel. Use the u and d buttons to set the contrast between -2
(darker) and +2 (brighter).
Contrast Adjusts the contrast of the LCD panel. Use the u and d buttons to set the contrast between -2
(lowest contrast) and +2 (highest contrast).
Restore settings Select Yes and then press the Z button to return the settings in the Display menu to their default
values.
Energy saving menu
Item Description
Power Off Timer Specifies the length of time before the scanner enters power off mode if no operations are made.
Sleep Specifies the length of time before the scanner enters sleep mode if no operations are made.
Restore settings Select Yes and then press the Z button to return the settings in the Energy saving menu to their
default values.
Network menu
Note:
This is not displayed if a password is set for this panel in EpsonNet Config.
Network Interface Panel User's Guide
About the Control Panel
20