Epson PictureMate PM290 - Manual (Page 14)

14 Preparing to Print PictureMate PM 260 / PM 290
3. Open the output tray.
4. Press d On.
5. Make sure the memory card light is off and no
cards are in both slots. Then insert a memory card
into the correct slot, as shown in the illustration.
c
Caution:
❏ Insert just one card at a time.
❏ Load your memory card only as shown
in the following table or you may
damage your printer, memory card, or
both. If you insert a card incorrectly,
you see an error message on the LCD
screen. Remove the memory card and
insert it correctly.
❏ Do not press the button on the right
side of the lower card slot when you
insert a CompactFlash card or you
cannot remove the card.
❏ If the CompactFlash card is not
recognized, remove the card and
insert it again.
❏ Make sure you fit mini memory cards
with their adapters before inserting
them into the printer's memory card
slots. If you do not use an adapter, the
memory card and the printer may be
damaged.
Push