Epson PictureMate PM290 - Manual (Page 8)

8 Safety Instructions PictureMate PM 260 / PM 290
When using the optional battery
❏
If battery acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly with water
and seek medical treatment. If a battery is swallowed, seek
medical treatment immediately.
❏
Use only an Epson Li-ion battery model D121A for this
printer according to the directions in the user
documentation. Replacing the battery with an incorrect
model may cause an explosion.
❏
Use only AC adapter model A381H to charge the battery
and operate the printer.
❏
Do not charge or use the battery with devices other than
the specified product. Using the battery with other devices
may damage the battery or other devices, or may cause an
explosion.
❏
To protect against short circuits, do not remove the outside
case of the battery.
❏
Do not handle the battery with wet hands or use them near
water.
❏
Do not expose the battery to water or high humidity.
❏
Do not drop, puncture, disassemble, mutilate, or
short-circuit the battery.
❏
Do not place the battery near or into fire or water.
❏
Do not use the battery that is leaking or damaged in any
way.
❏
Do not charge the battery on devices except this printer.
❏
Do not charge the battery near open flame or in very hot
locations.
❏
Keep the battery away from heat sources.
❏
Do not leave the battery in a vehicle to prevent the battery
from overheating.
❏
Do not insert objects into any openings as they may touch
dangerous voltage points or short-circuit components.
❏
Prevent the battery from coming into contact with metal
objects that could short-circuit it, such as coins or keys.
❏
Do not solder wires or terminals directly to the battery.
❏
Do not touch battery terminals.
❏
Keep the battery away from open flame if they leak or smell
strange.
❏
If overheating, discoloration, or deformation occur, remove
the battery from the printer and do not use it.
❏
Charge the battery before using it if it has not been used
for a long period.