Edirol UA-1000 - Manual (Page 18)

18
Preparations for using the UA-1000
Installing the driver
What is a driver?
A “driver” is software that transfers data between the UA-1000 and application
software running on your computer, when your computer and the UA-1000 are
connected by a USB cable. The driver sends data from your application to the UA-
1000, and from the UA-1000 to your application.
1
With the UA-1000 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
If you are using virus checking or similar software, be sure to exit it as well.
2
Open the System Properties dialog box.
1. Click the Windows start menu, and from the menu, select Control Panel .
2. In “Pick a category,” click “Performance and Maintenance.”
3. In “or pick a Control Panel icon,” click the System icon.
fig.2-1
3
Click the Hardware tab, and then
click [Driver Signing] .
The Driver Signing Options dialog box
will appear.
4
Make sure that “What action do
you want Windows to take?” is set
to “Ignore.”
If it is set to “Ignore,” simply click [OK] .
If it is not set to “Ignore,” make a note of
the current setting (“Warn” or “Block”).
Then change the setting to
“Ignore” and
click [OK] .
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar software, be
sure to exit it as well.
You must log on using a user
name with an administrative
account type (e.g.,
Administrator). For details on
user accounts, please consult
the system administrator of
your computer.
Depending on how your
system is set up, the System
icon may be displayed directly
in the Control Panel (the
Classic view). In this case,
double-click the System icon.
If you changed “What action
do you want Windows to
take?,” you must restore the
previous setting after you have
installed the driver.
UA-1000_e.book 18 ページ ２００３年８月６日 水曜日 午前１１時５２分