Edirol UA-1000 - Manual (Page 39)

39
Various settings
Reading and writing memories
Five sets of UA-1000 settings can be stored within the UA-1000 itself. These stored memories can be read and
written from UA-1000 Control Panel.
For the procedure, refer to README_E.HTM on the included CD-ROM.
Convenient ways to use the OUTPUT PATCH BAY
You can store two different settings for the OUTPUT PATCH BAY, and switch between these two settings.
DIRECT MONITOR: ON
fig.monitor-on
If even one INPUT MONITOR (DIRECT MONITOR) switch is ON ,
the DIRECT MONITOR: ON settings of the OUTPUT PATCH BAY
will be used.
* These settings will always be used if the Direct Monitor Soft Control switch
of the UA-1000’s front panel is turned off .
DIRECT MONITOR: OFF
fig.monitor-off
If all of the INPUT MONITOR (DIRECT MONITOR) switches are
OFF , the DIRECT MONITOR: OFF settings of the OUTPUT PATCH
BAY will be used.
Examples of use
Simply by switching INPUT MONITOR (DIRECT MONITOR) on/off, you can switch between settings for
monitoring and settings for mastering.
fig.output-monitor
Settings for monitoring
These settings are appropriate when you
want to hear the sounds being input to the
UA-1000 from the input jacks.
fig.output-monitor2
Settings for mastering
These settings are appropriate when you
have finished acquiring audio from the
input jacks, and are mastering the data on
your computer.
UA-1000_e.book 39 ページ ２００３年８月６日 水曜日 午前１１時５２分