Edirol UA-1000 - Manual (Page 24)

24
Preparations for using the UA-1000
Input/output device settings
If you are using the UA-1000 with the Media Player included with Windows, use the
following procedure to make input/output device settings.
The method for making device settings will depend on the software you are using.
For details, refer to the owner's manual for your software.
1
Open the Sounds and Multimedia Properties dialog box.
1. Click the Windows start menu, and from the menu, select Control Panel .
2. In “Pick a category,” click “Sound, Speech, and Audio Devices.”
3. In “or pick a Control Panel icon,” click the Sounds and Audio Devices icon.
2
Click the Audio tab.
fig.sound
3
In Sounds and Audio Devices
Properties, click each Default device
field and choose the following device
from the list that appears.
4
Click [OK] to close the Sounds and
Multimedia Properties dialog box.
Sound playback EDIROL UA-1000
Sound recording EDIROL UA-1000
MIDI music
playback
EDIROL UA-1000
Depending on how your
system is set up, the sounds
and Audio Devices
icon may
be displayed directly in the
Control Panel
(the Classic
view). In this case, double-click
the Sounds and Audio
Devices
icon.
If you are using sequencer
software, you will need to
make audio and MIDI device
settings in your software. For
details, refer to the owner's
manual for your software.
The completes the driver settings.
UA-1000_e.book 24 ページ ２００３年８月６日 水曜日 午前１１時５２分