Precision Medical PM4351 EasyFlow5 - Manual (Page 17)

15
Compressor Assembly Replacement (507322)
Disassembly
Tools and equipment required:
#2 Phillips Screwdriver
Diagonal Cutting Pliers
Needle Nose Pliers
1. Follow all steps for Front Panel Assembly Replacement;
Disassembly.
2. Grasp Inlet Filter Box and pull upward to remove from the
Compressor Cover.
3. Using a Phillips screwdriver, remove the nine (9) Screws
securing the Compressor Cover to the Base and set aside.
4. Remove Compressor Cover by lifting upward and set aside.
5. Using Diagonal Cutting Pliers, cut and remove Hose Clamp on
center port of Compressor indicated in photo.
6. Using Diagonal Cutting Pliers, cut and remove Cable Tie
securing the Compressor Baffle to the metal tubing as indicated
in photo.
7. Slide Hose off of center Barb on Compressor.
8. Remove Compressor Baffle from the Compressor.
9. Remove Compressor wires from Saddle Mount.
10. Disconnect Compressor Wires connected to Capacitor.
11. Lift the Compressor up and off the Base.