Rose Electronics Orion X-series - Manual (Page 42)

ORION XTENDER INSTALLATION AND OPERATIONS MANUAL 38
Upgrade Module Serial RS422:
1. Connect the CPU to the Transmitter unit by using the serial cable.
2. Connect the Receiver unit to the serial connector of the input device.
Upgrade Module Digital Audio:
1. Connect the digital audio source with Transmitter unit using the appropriate audio cable.
2. Connect the audio output of the Receiver unit with digital speakers or audio amplifiers.
If several active sources are connected, Mini-XLR input takes priority. The audio signal is available at all
outputs.
Upgrade Module USB-HID:
1. Connect the CPU with the Transmitter unit (USB-HID 2).
2. Connect the USB-HID devices to the Receiver unit (Connect to USB-HID devices 2).
Upgrade Module PS/2:
1. Connect the CPU to a CPU unit via proved PS/2 cables for PS/2 devices.
2. Connect the PS/2.
Upgrade Module USB 2.0 Embedded:
1. Connect a CPU USB 2.0 port to the Transmitter unit (USB 2.0).
2. Connect the USB 2.0 devices to the Receiver unit (Connect to USB 2.0 devices).
Upgrade Module USB 2.0:
1. Connect a CPU USB 2.0 port to the Transmitter (USB 2.0).
2. Connect the USB 2.0 devices to the Receiver unit (Connect to USB 2.0 devices).