Rose Electronics Orion X-series - Manual (Page 49)

45 ORION XTENDER INSTALLATION AND OPERATIONS MANUAL
Mouse
The device is compatible with most 2-button, 3-button and scroll mice.
Other USB-HID devices
The proprietary USB emulation also supports certain other USB-HID devices, such as specific touch screens,
graphic tablets, barcode scanners or special keyboards. Support cannot be guaranteed, however,
for every USB-HID device.
Only two USB-HID devices are supported concurrently, such as keyboard and mouse or keyboard and touch
screen. A hub is allowed, but it does not increase the number of HID devices allowed. To support other USB
'non-HID' devices, such as scanners, web cams or memory devices, choose our devices with transparent USB
support.
PS/2 @ 9\mod_1362475419529_6.doc @ 71291 @ 3 @ 4
PS/2
Our devices with PS/2 interface support the use of a PS/2 keyboard and mouse.
Keyboard
Compatible with most PS/2 keyboards, even with various special keyboards. Certain keyboards with additional
functions can be run with special firmware.
Mouse
The device is compatible with most 2-button, 3-button and scroll mice.
USB 2.0 (transparent)
KVM Extender models with transparent USB 2.0 support allow the connection of all types of USB 2.0 devices
(without restriction). USB 2.0 data transfer is supported, depending on the upgrade module, with USB high
speed (max. 480 Mbit/s) or USB Full Speed (max. 12 Mbits).
Each USB 2.0 port provides a maximum current of 500 mA (high power).
RJ45 (Interconnect)
The communication of the CATx devices requires a 1000BASE-T connection. Connector wiring must comply
with EIA/TIA-568-B (1000BASE-T), with RJ45 connectors at both ends. All four cable wire pairs are used.
Fiber SFP Type LC (Interconnect)
The communication of fiber devices is performed via Gigabit SFPs that have to be connected to suitable fibers
fitted with connectors type LC. The correct function of the device can only be guaranteed with SFPs provided
by the manufacturer. SFP modules can be damaged by electrostatic discharge (ESD).
 Please consider ESD handling specifications.
Serial Interface
The serial interface option supports a
full-duplex transmission with a real hardware handshake up to a Baud
rate of 19,200 Baud. The CON Unit is cabled as DTE (Data Terminal Equipment, like CPU output) and can be
connected directly to DCE devices (Data Communication Equipment).