Rose Electronics CrystalView Extreme - Manual (Page 10)

6 CrystalView Extreme Installation and Operations Manual
Transmitter - Front Panel
Indicator Description
Pair (Button) Reserved – (See Appendix C)
Status
(Green LED) On = Ready / Off = No power /
Blinking = being configured
Link
(Green LED) On = Valid Link between Transmitter and Receiver
Off = No Link
Video
(Green/Amber LED) On = Valid Link between the Transmitter and host
computer
Off = No Link
Blinking = Video is being transmitted between the
Transmitter and Receiver
Amber = No video source detected
Blinking Amber = Invalid resolution detected
USB
(Green/Amber LED) On = Properly enumerated on host computer
Off = No Link
Blinking = USB data being transmitted between the
Transmitter and Receiver
Amber = No connection to the host computer
Blinking Amber = Over current condition on one
or more USB ports
Transmitter - Rear panel Connectors
Connector Description
DVI-D In DVI-D Video Input from Host computer (Supplied)
Config Reserved for company use only
USB Type B USB input from Host computer (Supplied)
Link (RJ45) Connection for a CAT5 or better cable to the
Receiver unit
Power +5V, 3A power adapter (Supplied)
Table 1. Transmitter Indicators/Connectors