Rose Electronics CrystalView Extreme - Manual (Page 6)

2 CrystalView Extreme Installation and Operations Manual
Features

Supports HD video with resolutions up to 1680 x 1050

Supports USB 2.0 (high-speed / 480 Mb/s),
USB 2.0 and 1.1 (Full-speed / 12 Mb/s, and
USB 2.0 and 1.1 (Low-speed / 1.5 Mb/s

Extend your workstation to any location on your corporate LAN or a
point-to-point connection between the transmitter and receiver units.
Point-to Point max CATx cable length of 330 feet (100M).

3-USB port available on the Receiver unit

Standard USB hubs can be used to increase the maximum number of
connected USB devices to 13 and 4 USB hubs.

Up to 500 mA of power is available at each USB port on the Receiver
for powering high-power USB devices

Plug-and-Play installation, no configuration or set-up needed.

Support multiple systems on a LAN. (up to 30 on a 1Gbps LAN)

The Transmitter can locate the paired Receiver anywhere within the
network.

Operates on a network connection of 100Mbps or 1Gbps.

Operates through Ethernet switches.

Installation consists of:
1. Connecting the Receiver to your DVI monitor, USB keyboard and
mouse, speakers and USB device(s)
2. Connect the Transmitter to your computer’s DVI video port and
USB port.
3. Connect the Transmitter and Receiver to your network using
standard CAT5 cable
4. Apply power and the installation is complete.
The Transmitter unit requires a +5VDC power adapter (included).
The Receiver unit requires a +24VDC power adapter (included).