Rose Electronics CrystalView Extreme - Manual (Page 5)

INTRODUCTION
CrystalView Extreme Installation and Operations Manual 1
Disclaimer
While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither
does the manufacturer assume any liability for damages resulting from the
use of the information contained herein. The manufacturer reserves the
right to change the specifications, functions, or circuitry of the product
without notice.
The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.
System Introduction
Thank you for choosing the CrystalView Extreme extender from Rose
Electronics for your remote accessing needs. The CrystalView Extreme
system consists of a Transmitter unit and a Receiver unit. The Transmitter
unit connects to your corporate LAN and to your computer’s DVI-D and USB
Type A connectors using the provided DVI and USB cables. The Receiver
unit also connects to your corporate LAN and to your remote workstation.
This allows you to access your computer from any location on your LAN.
The Transmitter and Receiver are paired at the factory and only
communicate with each other. If the Transmitter needs to be paired to a
different Receiver or a Receiver paired to a different Transmitter, see
Attachment C for instructions.
The CrystalView Extreme extender supports all USB 2.0 devices. It is
ideal for use in industrial control areas, digital signage, connecting LAN
cameras for security systems, USB device printing, scanning and
storage.
If additional USB devices are needed, you can add up to 4 USB hubs to
the three port Receiver model and connect up to 13 USB devices.
The CrystalView Extreme supports all major operating systems including
Windows
®
, MAC
®
, and Linux
®
USB printers, scanners, web cameras, USB hard drives, flash drives, MP3
players and more can easily be connected to the Receiver unit.