Elektra Beckum Cool 401 - Manual (Page 18)

18 11.02
Part 4 Operation
Following operation data can be
recalled by operating the data
selector key ( ):
- Pressure dew point
- Summer operation
- Percentage running time of
CA-dryer in relation to total
running time of the system
- Next condensate drain in 3
minutes
1. Press data selector key ( )
for 5 seconds to change from
display- into change mode.
2. If necessary press data selec-
tor key ( ) several times until
requested change mode
appears.
3. Adjusting by condensate drain
key ( )
4. Press data selector key ( )
for 5 seconds to save changes
and returning into display
mode.
4.5 electronic regulator
- operation
Fig. 12: Pressure dew point
Fig. 13: Percentage running
time of CA-dryer
Fig. 14: Condensate drain
4.6 Changing the factory
setting
Fig. 15: Changing factory
setting