ETA Systems FC01-LQ - Manual (Page 38)

Flow Meter FC01-LQ Flow Meter FC01-LQ
32 Configuration 32 Configuration
5.4 Flow rate unit (menu option: FLOW UNIT)
At these point (1st line top left) the requested unit for the flow velocity will be set.
This menu option is used to set the desired flow rate unit:
• METRE/SEC [m/s] • FEET/SEC [FPS]
• PERCENT [%] • BLANK [no unit]
Any further entries relating to flow rate (e.g. limit value, analog ue output etc.), refer to that unit.
Standard percent is displayed when BLANK (no unit) is selected.
When the flow rate unit is changed, all configuration and parameter data relating flow rate will
automatically be converted!
5.5 Medium temperature unit (menu option: TEMP. UNIT)
This submenu is used to select the medium temperature unit (1st line top left).
Options are:
• GRAD CELSIUS [°C]
• GRAD FAHRENHEIT [°F]
• KELVIN [K]
All other entries relating to the medium temperature (limit value, analogue output, etc.) refer to
the unit selected there. When the temperature unit is changed, all configuration and parameter
data relating to medium temperature will automatically be converted.
5.6 Display (menu option: DISPLAY SELECT)
The FC01-LQ enables the user to define the 2nd line of the display 2 in certain points.
When the first line of the LC display in the main menu indicates the flow rate in the unit selected
as well as the medium temperature in °C, °F or K, it is possible to select the second line from
the following menu options (see para. 5.14).
• BARGRAPH Totalizer:
• LITRE/SECOND [l/s] • LITRE [l]
• LITRE/MINUTE [l/min] • METRE 3 [m 3 ]
• METRE 3 / HOUR [m 3 /h] • GALLONS° [° = US-GALLONS]
• GALLONS°/MINUTE
Where totalizer function has been selected, the totalizer will start at zero counting in the unit
selected (litre, m
3 or gallons).
When the display changes from m 3 to litre or gallons, or from litre or gallons to m 3 , the value
already counted will be converted.
The content of the totalizer is deleted by simultaneously pressing UP and DOWN =
, or when the max. display value (99999999.9 l, m 3 or gallons) is reached.
In both cases the totalizer will restart from zero.
▲ + ▼
▲ ▼
5.4 Flow rate unit (menu option: FLOW UNIT)
At these point (1st line top left) the requested unit for the flow velocity will be set.
This menu option is used to set the desired flow rate unit:
• METRE/SEC [m/s] • FEET/SEC [FPS]
• PERCENT [%] • BLANK [no unit]
Any further entries relating to flow rate (e.g. limit value, analog ue output etc.), refer to that unit.
Standard percent is displayed when BLANK (no unit) is selected.
When the flow rate unit is changed, all configuration and parameter data relating flow rate will
automatically be converted!
5.5 Medium temperature unit (menu option: TEMP. UNIT)
This submenu is used to select the medium temperature unit (1st line top left).
Options are:
• GRAD CELSIUS [°C]
• GRAD FAHRENHEIT [°F]
• KELVIN [K]
All other entries relating to the medium temperature (limit value, analogue output, etc.) refer to
the unit selected there. When the temperature unit is changed, all configuration and parameter
data relating to medium temperature will automatically be converted.
5.6 Display (menu option: DISPLAY SELECT)
The FC01-LQ enables the user to define the 2nd line of the display 2 in certain points.
When the first line of the LC display in the main menu indicates the flow rate in the unit selected
as well as the medium temperature in °C, °F or K, it is possible to select the second line from
the following menu options (see para. 5.14).
• BARGRAPH Totalizer:
• LITRE/SECOND [l/s] • LITRE [l]
• LITRE/MINUTE [l/min] • METRE 3 [m 3 ]
• METRE 3 / HOUR [m 3 /h] • GALLONS° [° = US-GALLONS]
• GALLONS°/MINUTE
Where totalizer function has been selected, the totalizer will start at zero counting in the unit
selected (litre, m
3 or gallons).
When the display changes from m 3 to litre or gallons, or from litre or gallons to m 3 , the value
already counted will be converted.
The content of the totalizer is deleted by simultaneously pressing UP and DOWN =
, or when the max. display value (99999999.9 l, m 3 or gallons) is reached.
In both cases the totalizer will restart from zero.
▲ + ▼
▲ ▼