DE DIETRICH DOP1140 - Manual (Page 40)

• PROGRAMMED COOKING:
Cooking with immediate start and
programmed cooking time
- Select the desired cooking mode and adjust
the temperature (see paragraph: immediate
cooking).
- Press the
button (2.5.1).
The display flashes 0h00 to indicate that the
time can be set.
-Set the cooking time using the control knob
(2.5.2).
Example: 30 mins’ cooking (2.5.3).
- Press the knob to confirm.
The cooking time starts to count down
immediately it is set. The indicator
shows the temperature rise
inside the oven. The cooking time display stops
flashing (2.5.4).
Once these five steps have been completed, the
oven heats up:
A series of beeps sounds, when the oven has
reached the selected temperature.
At the end of cooking (end of programmed time),
the oven stops, 0h00 flashes (2.5.5). A series of
beeps sounds for a few seconds. The beeps may
be stopped by pressing any button.
Caution
All types of cooking are done with the
door closed.
After a cooking cycle, the cooling fan
continues to run for a time, in order to
guarantee optimum oven reliability.
Cooking with delayed start and selected
end of cooking time
Proceed as for programmed cooking
(immediate start).
- Press the
button to make the end of
cooking indicator flash (2.6.1).
The end of cooking time symbol flashes to
indicate that it may now be set (2.6.2).
- Turn the selector to set the end of cooking
time (2.6.3).
Example: end of cooking at 13.30 (2.6.4).
- Press the control knob to confirm (2.6.5).
In case of no manual confirmation, the end of
cooking time is automatically saved after a few
seconds.
The cooking end time display stops flashing.
The display returns to the time of day.
An animation in the display indicates that the
oven is in delayed cooking mode (2.6.6).
When these 3 steps have been completed, the
oven heating start time is delayed so that
cooking ends at 13:30. When the cooking is
complete (programmed end of cooking time),
the oven stops and the cooking end indicator
and 0h00 flash. A series of beeps sounds for a
few seconds. The beeps may be stopped by
pressing any button.
• CUSTOMISING THE RECOMMENDED
TEMPERATURE:
Select the cooking function.
If you wish to customise the recommended
temperature:
- Press the T°C touch control until the °C
flashing.
- Set the temperature, using the knob.
- Press the knob to confirm.
• USING THE TIMER FUNCTION:
This function can be accessed either
independently from the oven or during a cooking
operation, but will not stop any cooking in
progress.
In the first case:
- Press the
button once (2.7.1).
The timer symbol and 0m00s flash (2.7.2).
Set the time using the control knob. Press the
knob again to confirm. The display stops
flashing after a few seconds and the timer starts
to run, counting down the time in seconds. Once
the time has elapsed, the timer emits a series of
beeps to let you know. The beeps may be
stopped by pressing any touch control.
In the second case, during a cooking operation:
- Press the
button 3 times to access the
timer Carry on in the same way as the
independent timer and confirm after adjusting
the time. The cooking continues and the timer
starts. Once the time is complete, stop the beeps
by pressing the control knob.
2.5
2.6
2.7
e n g l i s h