EverFocus EMV200 - Manual (Page 20)

13
1.12.2 Network Connection through Patch Cable
The connection to an existing network requires a normal patch cable (straight-through). The illustration shows the
connection to a network switch or router.
Figure 1-4 Network Connection through Patch Cable
Pinout of straight patch cable
1.13 FINAL INSTALL PROCESS
Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in the
power source. The POWER LED will light up if power is normal. Once the system has finished loading, you can
begin to set up the menu options for the DVR.