7 simple one to one connection – EverFocus EMV200 User Manual
Page 71
64
5.7
Simple One to One Connection
Crossover Ethernet Cable Pin outs:
The Figure below shows the pin configurations for a cross-over cable.
Connection Procedure:
The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have
never made a cross-over cable. Please remember you can not use a straight through network cable for
this application
Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the other
into the network card on the back of the computer.
Log into the EverFocus DVR menu and go to the Network Setting Menu.
You must use the Static IP option for this type of connection.
Assign an IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of
192.168.001.001. You can ignore DNS Server.