EverFocus EMV200 User Manual
Page 43
Advertising
36
Click
button to return to the previous level of menu.
4.4.4
Alarm-GPS Speed
Figure 4-21 Alarm – GPS Speed
Speed Unit: If the speed is being recorded from the GPS receiver, the desired speed display units must be
selected. Select GPS speed unit from KPH and MPH. Selecting MPH converts the GPS signal to display speed in
miles per hour.
GPS Speed: Select whether to record the vehicle speed or not.
Speed Higher Limit: Set the speed to determine at which level the alarm will be triggered.
Click
button to return to the previous level of menu.
Advertising