EverFocus EMV200 - Manual (Page 47)

40
Click
button to return to the previous level of menu.
4.5.2 Daylight Saving
Click button to set up daylight saving parameters
Figure 4-25 Date/Time Settings-Daylight Saving
Daylight Saving: Check the box to enable automatic daylight saving time adjustment.
Start Date: Set the start date for daylight saving time.
Start Time (hh:mm): Set the time when daylight saving time begins.
Set To (hh:mm): This is what the time will change to when daylight saving begins. For most regions, this will be
one hour ahead of the “Start Time”.
End Date: Set the end date for daylight saving time.
End Time (hh:mm): Set the time when daylight saving time ends.
The time change difference on the End Date will be the same as the difference between the Start Time and End
Time entered for the Start Date (typically 1 hour as in the example shown).
Click button to return to the previous level of menu.
4.6 Display
Figure 4-26 is a screenshot of the DISPLAY SETTING MENU. This menu will walk you through the Main Monitor
On-Screen Display (OSD) and Main Monitor Sequential setup.