EverFocus EMV200 - Manual (Page 50)

43
4.6.4 Sequence
Click button to set up Sequence parameters.
Figure 4-29 Display-Sequence
Step: Sequence order. For reference.
Camera: Select which camera appears in the current step.
Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds.
Sequence repeats continuously from steps 1 through 20 until interrupted.
Click button to return to the previous level of menu.
4.7 NETWORK SETTING
Figure 4-30 is a screenshot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a
network connection.
NOTE: Since every Network Configuration is different, please check with your Network Administrator or ISP to
see if your DVR should use specific IP addresses and/or port numbers.