Elmo SERVO AMPLIFIER DBP SERIES User Manual
Page 45
44
DBP - Rev 6/93
Signals connector - J1 (MBA-DBP/3U and MBA-DBP/6U)
Pin
Function
Remarks
1
Channel A input
2
Channel -A input
3
Channel B input
4
Channel -B input
5
-Index input
6
Index input
7
+5V output
There are several +5V pins. The accumulative
external load should not exceed 200mA.
8
+15V output
There are several +15V pins. The accumulative
external load should not exceed 100mA.
9
Circuit common
Signals connector - J2 (MBA-DBP/3U and MBA-DBP/6U)
Pin
Function
Remarks
1
Resolver reference
Max. voltage: 20Vptp or 7Vrms
Max current: 80mA
Max frequency: 20KHz
2
Resolver reference
common.
The reference voltage to the resolver must be
taken from pins 1 and 2 only.
3
Cosine signal input.
See 7.3
4
Cosine signal common.
See 7.3
5
Sine signal input.
See 7.3
6
Sine signal common
See 7.3
7
+15V output
There are several +15V pins. The accumulative
external load should not exceed 100mA.
8
-15V output
There are several -15V pins. The accumulative
external load should not exceed 100mA.
9
Circuit common