Elmo SERVO AMPLIFIER DBP SERIES - Manual (Page 54)

53
DBP - Rev 6/93
5.3 Terminals for DBP mounted in ENCD.
POWER TERMINALS FOR MBA-DBP/3UE (3U size)
Terminal Function
1 Motor phase A output.
2 Motor phase B output.
3 Motor phase C output.
4 AC supply-phase A.
5 AC supply-phase B.
6 AC supply-phase C.
7 DC power positive (+Vs)
8,9 DC power common
10 Ground
11 Ground
POWER TERMINALS FOR MBA-DBP/6UE (6U size)
Terminal Function
MA Motor phase A output.
MB Motor phase B output.
MC Motor phase C output.
GND Ground
AC AC supply-phase A.
AC AC supply-phase B.
AC AC supply-phase C.
POW COM POWER COMMON
+VS External shunt resistor connection / +VS.
SO External shunt resistor connection.
Attention:
DC power commons, control commons and fan common are floating with respect to each
other. Do not short them unless specified.
For isolated amplifiers connecting control common to ground is accomplished by
inserting R2 (short resistor) on the mother board.